Press Releas Rack Serve Carrier with Two Separate Working Lifting Platforms

 
14.3.2003

Rack Serve Carrier with Two Separate Working Lifting Platforms

Systraplan, specialist for flat materials in the storage technology, has developed a rack serve carrier which obtains a considerably higher performance with two independent working lifting platforms.

In comparison to conventional rack serve carriers this system works with two lifting platforms which can be controlled independently. Each platform is equipped with own lifting drives and load suspension devices, which can work to both sides of the aisle.

Due to the independent working from each other a 20 % higher output in comparison to conventional systems can be achieved.
A direct connection of this storage technology to producing machines, i. e. saws, are already standard and proved to be very advantageous.

Special saws are also in Systraplans’ program. So a cross saw was delivered, which performs a 2.100 mm long cut within a 1.1-second-cycle.

Trimming and cutting saws for boards are part of the program, too. The saws consists of a 360° revolving saw-head fitted as per requirement with a pre-cutting saw. The saw head is positioned over the sawing table with the help of a multi-axial and multi-directional support.

Systraplan is represented at the LIGNA 2003, hall 26, stand A 57. There the new developed rack serve carrier will be presented. The LIGNA fair takes place from 26. – 30. May 2003 in Hanover.


 
 
www.ligna.de 
Diese Seite als pdf-Download